|
|
Title: |
Field Engineer-communications
|
Location: |
US-Arizona
|
Work History: |
Millenium, Arifjan, Kuwait
April 2011-Present
Intermediate Technician, Counter Remote Electronic Warfare-CREW- Warlock/Duke for military in Kuwait.
Install and test AN/VLQ-9 counter IED systems on MRAPs and other vehicles. Systems include GPS, V2, V3 and CVRJ microprocessor control box. Use spectrum analyzer to test jamming capabilities before deployment of vehicles. Test and operate Symphony on board control unit. Troubleshoot mid and high band antennas and RF cabling for faults using the Remote Control Unit (RCU). Install and test AN/VLQ-12 Duke V3 CREW 2 system.
Rockwell Collins, Kandahar, Afghanistan OEF, Expeditionary
December 2010-April 2011
Nokia GSM cell site FSR for Marines in southern Afghanistan.
Electrical installation and repair. Power generator install and maintenance. BCS, MSC and BTS transceiver radio commissioning (900+1800 Mbps). Install and adjustment of pan and tilt servos for line of sight RF antenna alignments. Bgan InmarSat SatCom transceiver electrical wiring and alignments, omni directional radio antennas with band pass filters. Travel around Afghanistan supporting Marine Expeditionary units. Provide technical support to field engineers, technicians and product support who are diagnosing, troubleshooting, repairing and debugging complex electro/mechanical equipment, computer systems, and/or complex software. Installs, operates, maintains, repairs and modifies equipment. Normally receives general instructions on routine work, detailed instructions on new projects or assignments. Conducts technical analysis of product implementations, modifications and enhancements to product in accordance with specific customer specifications and implementations.
Builds productive working relationships internally and externally. Represents organization on specific projects. Develops solutions to a variety of problems of moderate scope and complexity. Refers to policies and practices for guidance. Works on problems of moderate scope where analysis of situations or data requires a review of a variety of factors. Exercises judgment within defined procedures and practices to determine appropriate action. Contributes to the completion of organizational projects and goals. Frequent use of general/technical knowledge and industry/functional practices, techniques, and standards. General application of concepts, and principles. Developing professional expertise. Responds to situations where first-line product support has failed to isolate or fix problems in malfunctioning equipment or software. Troubleshoots technical problems and issues, determines technical solution in accordance with product and customer specifications, and recommends actions to company or customer representatives for coordinative product solution.
PAE, Islamabad, PK, OEF
April 2010-Oct 2010
Integrated Digital Network ExChange Field Technician (tactical WAN and long haul systems) Operation Enduring Freedom.
Test, monitor, and repair to secure wide area networks. Control the physical data, network, and transport layers of strategic and tactical Communications-Computer Systems including connectivity to local and wide area networks, end-to-end communications and SL100 switching systems, long-haul transmission for the global information grid. Perform, coordinate, and supervise the design, configuration, operation, restoration, and improvements on assigned network elements. Analyze network capabilities and performance identifying problems for corrective action. Test, replace and re-key Sypris KIV and KG 175 Taclane General Dynamics cryptographic devices. Use CZY-10, KOI-18 w/ KYK-13 and the Simple Key Loader SNC-C4N key loaders. Updated AN/PRC 150 radios. Fabricate cable assemblies including GPS timing and clocking options. Perform control facility inspections. Make operational adjustments to technical control and telecommunication transmission equipment to include but not limited to Promina 400 and 800 IDNX, asynchronous Transfer mode (ATM) switching equipment, fiber optic modems and wide band radio equipment. Work independently to resolve issues that have an impact on the Command and Control Communications, Computers and Intelligence (C41) configurations in OCONUS and for Coalition forces Iraq. Analyze, evaluate, coordinate and recommend communication solutions to the military. Monitor, repair, up-grade, and test Promina IDNX multiplexer and de multiplexer components from trunk to DSN level that provide SIPR/NIPR/VOIP/DSN/VTC/JWICs services to the war fighter. Use CCCDs, schematics and my skills to maintain all tactical links, trunks, and nodes. Maintain and resolve USKET and DKET K-band and TSSR troposphere trunk issues. Maintain and submit REMEDY or FACIT action tickets and operational readiness war reports, for pro-longed circuit outages. Act upon and implement FRAGOs / Fragmented Orders. Submit requests for TSOs and ASIs / Authorized Service Interruptions. Initiate trend analysis for active links and trunks. Design and maintain CAP network drawings and cut sheets for the CENTCOM standardization initiative.
ITT Systems, Baghdad, Iraq, OIF
November 2004 – March 2010
Integrated Digital Network ExChange Field Technician (tactical WAN and long haul systems) Operation Iraqi Freedom.
Test, monitor, and repair to secure wide area networks. Control the physical data, network, and transport layers of strategic and tactical Communications-Computer Systems including connectivity to local and wide area networks, end-to-end communications and SL100 switching systems, long-haul transmission for the global information grid. Perform, coordinate, and supervise the design, configuration, operation, restoration, and improvements on assigned network elements. Analyze network capabilities and performance identifying problems for corrective action. Test, replace and re-key Cypris and KG 175 General Dynamics cryptographic devices.. Fabricate cable assemblies including GPS timing and clocking options. Perform control facility inspections. Make operational adjustments to technical control and telecommunication transmission equipment to include but not limited to Promina 400 and 800 IDNX, asynchronous Transfer mode (ATM) switching equipment, fiber optic modems and wide band radio equipment. Work independently to resolve issues that have an impact on the Command and Control Communications, Computers and Intelligence (C41) configurations in OCONUS and for Coalition forces Iraq. Analyze, evaluate, coordinate and recommend communication solutions to the military. Monitor, repair, up-grade, and test Promina IDNX multiplexer and de multiplexer components from trunk to DSN level that provide SIPR/NIPR/VOIP/DSN/VTC/JWICs services to the war fighter. Use CCCDs, schematics and my skills to maintain all tactical links, trunks, and nodes. Maintain and resolve USKET and DKET K-band and TSSR troposphere trunk issues. Maintain and submit REMEDY or FACIT action tickets and operational readiness war reports, for pro-longed circuit outages. Act upon and implement FRAGOs / Fragmented Orders. Submit requests for TSOs and ASIs / Authorized Service Interruptions. Initiate trend analysis for active links and trunks. Design and maintain CAP network drawings and cut sheets for the CENTCOM standardization initiative.
ManTech MTISC, Tuzla, Bosnia i Herzegovina
October 2003 – November 2004
Senior Electronics Field Engineer for Intelligence and Electronic Warfare.
Supported the Central European Command-CECOM and Stabilization Force/NATO. Deployed in Tuzla, Bosnia Herzegovina, supporting the base security force and the NATO multinational stabilization forces throughout the entire region. Perform site survey, fabrication, installs, and testing of remote repeater antennas and electronic equipment including the Motorola 3000 and XTS5000 series mobile radio transceivers 136 -174 / 700-800MHZ. Use impedance matched, band-pass filters for specific mission frequencies. SINCGARS radio install and turn up. Travel to remote sites to support computer security data bases, File Pro, and electronic personnel ID database and vehicle identification tracking system. Service and replace Raytheon forward looking infrared cameras and single point of entry metal detection devices in support of Force Protection elements. Support Night Stalker FLIR, vehicle mounted infrared surveillance cameras and range finders. Astro Spectra support. Repair / replace RF-UHF connectors and cables. Perform logistical duties such as researching and ordering replacement parts and test equipment using the automated 2407. Evaluate, test and turn in non serviceable equipment to depot for disposition. Maintain equipment specification and operations manuals. Army PSYOP and HUMINT voice and digital imaging devices. Analyze and repair power generation and power converter equipment. Provision and repair Quantar digital repeater equipment in support of SFOR Joint Forge Army units assigned to the AOR. Commercial and military communications high tower surveys and installations.
Northrop Grumman Information Systems, Diego Garcia
August 2002 – September 2003
Field Engineering Technician / PMEL Coordinator.
GEODSS-Geo synchronous Deep Space Surveillance performed operational and maintenance functions during the assigned shift. Performed space observations at the site in accordance with applicable procedures and directives. Monitored site operation performance for compliance and quality. Performed scheduled and unscheduled maintenance and repair of assigned electro-optical, digital, and servo-systems equipment, in accordance with established Technical Orders and company procedures. Performed system diagnostics and fault isolation to component level. Performed nightly mount and SOI calibrations and daily system database and file data backup processes. Interfaced with Air Force DSST in operational areas, communicating vital operational information to the JSPOC. Participated in training and proficiency exercises and operational tests. Performed site telecommunications operations and maintenance. Monitored weather and equipment status for the JSPOC. Performed pre and post mission system checks and operations. Performed data editing, validation, classification and communication transmission functions. Used appropriate Technical Orders, instructions, safety procedures, test equipment, and shop tools to perform scheduled preventive maintenance inspections. Troubleshoot camera and sensors to the module level. Performed fault isolation using special test fixtures and precision measuring equipment. Performed component level soldering including cable builds. Documented maintenance and supply actions using appropriate forms, instructions, and regulations. Performed PMs such as voltage checks of equipment and camera racks, and dome. Performed all sensor calibrations from DPG console or sensor controller. Reconfigured communications from primary to secondary circuits and performed communications systems checks. Coordinated with technical control for site communications troubleshooting. Configure GPS timing. Maintained emergency power generators. Review, post, update TOs, checklists, procedures and training materials. Prepared AFTO 22 forms. Assisted with facilities projects and corrosion control. Ordered of parts for bench stock. Performed data entry and prepared situation reports, logs, and records covering occurrences during the assigned shift. Provided training and system demonstrations for visiting personnel and new hires. Performed safety observations during maintenance activities.
Alcatel USA
December 1998 – July 2002
Product Support Field Engineer
Layer 4 install, test and commission new Alcatel telecom DWDM optical products. Train contract and customer personnel on the Optinex DWDM optical transport and Metro enterprise product lines. Support post sales with final acceptance tests, document review/modifications and product performance evaluations in field and lab. Provide field support for customer emergency outages. Supervise and train field supervisors and install crews. Field duties included, perform installation guidance/site surveys for new telecom products, field testing of product, understand theory of new products, gather and document project information, verify completed equipment testing results meet factory specifications and customer requirements, provide on-site support to customers, compile test data sheets, obtain job sign off, train fellow employees, update system documentation including red lines, provide custom equipment configurations, conceive and implement custom accessories, document and report equipment problems, procure tools and materials to complete assigned job, interface with project management and customers alike regarding installation and testing deadlines. In house responsibilities include; keep up to date on emerging technology, equipment hardware and software upgrades, maintaining test procedures, implement software releases including updating and training document control personnel about specific product changes and procedures. Maintain factory test bed equipment. Tasks include; 1640 Dense Wavelength Division Multiplexing/SONET OC-48 to192. Commissioned nodes using HP Open View and 1301 NMX. Access Central Processor using WAN or direct RS 232 processor interface. Install and tested modules: Mass Storage Unit, OSC, combiner/splitters, telemetry interface modules, SPC, L-band couplers, Dispersion Compensation Units. Attenuated spans according to engineering specs. Configure Digital Communications Channels and modems at network elements to provide remote logon and network inventory capabilities. Configure signal regeneration nodes. Install DC power distribution systems. Perform channel spectrum balancing, Bit Frame Error Rate, link and system testing, jitter test, extinction ratio, cross talk, packet loss, Central Processor Card, system interference, outage recoverability testing all according to Alcatel manufacturer specs. I-pattern, Tributary Receive Wavelength Adaptor sensitivity factory testing. Assist in customer lab Final Acceptance Testing, RE: module and software release up-grades. Replace faulty modules and ship to factory for repair and warranty recoverability using return authorizations. Turn up and balance spectrum Wavelength Add Drop Multiplexer channels. Assembled first Alcatel DWDM proto types prior to field deployment, 1690 / 1696 DWM METRO supporting fast Ethernet, Asynchronous Transfer Mode, OC-12/48/192 fixed or multi-clock dense wavelength multiplexer. Supported SONET network using LINUX based software. Construct point-to-point systems and redundant rings with fold back capabilities. Configure 1690 WDM Enterprise for short haul environment. Perform field and customer up-grades with new software releases. Worked with documentation department writing and updating the official test, turn-up, installation, and parts reference manuals for distribution to the customer. Perform final acceptance tests with 1690 DWM in lab prior to customer release. Modify fielded equipment as per customer performance expectations. Document field reliability and maintainability reports, implemented product modification changes to factory mechanical engineering, performed demos for customers and Alcatel training and documentation departments. Perform field testing such as link sensitivity and power loss. Connection of shelf\PIDs for alarm monitoring, cabling modifications, PDU connectivity for terminal grounding /power, fiber routing/management, front panel fiber protection, fiber jumper design, power distribution modules. Teach Fiber Cleaning techniques to peers and customers according to official procedures. Trainer for the 1696 DWDM Enterprise product line. Install and configure hubs for LAN terminal integrations. Configure domains for lab multiple node, IP addressing. Assemble and install CAT V and VI shielded cabling. Created Statement Of Work documents for field projects. Created Method of Procedures with for new equipment installs and testing. Update and review test documentation test and review product specifications and test manuals. QA / QC installations and prepared test results for customer sign off.
Metropolitan Fiber Systems-MFSNT
July 1996 – December 1998
Field System Engineer / electrical sub-contract foreman
OSP Field Engineer.
Performed a variety of tasks depending on the job location and task assignment; New Jersey - Installed and commissioned electronic equipment for New Jersey Trans Authority EZ-pass toll systems, NJ turnpike. Installed video security, violation cameras and data recorders. Install and test treadles, vehicle height and weight monitors. Supervise IBEW contract electrical workers. Supervised OSP crews in Alaska during the Alaska Radio and Telephone project. Check for electrical code compliance. Inspect for correct placement of fielded equipment
in compliance with contract guidelines. Inspect burial and aerial fiber installs on the Alaska Pipeline ROW which included splice boxes and hand holes according to as-built specifications. Obtained construction permits from the military, state and Alyeska to insure work progressed in a timely manner. Install Intellect OC-3/12 and Alcatel 1603 cross-connects from Prudhoe Bay to Valdez. Install GPS reference timing transceivers and antennas at regeneration sites. Trained on DC battery enclosures for confined space work environments. Wire wrap cross connect panels, fabricate coax, tri-ax and N-type connectors. Install DC main power, battery back-ups, and general halo type site grounding. Perform fiber locations and red line corrections. Arizona Department of Transportation federal highway communications up-grade project consisting of 90 nodes with a host of electronic equipment used for signal timing, highway warning signs and video monitoring systems. Installed and tested traffic timing products. Correct as-built red lines to meet customer specifications. Perform customer final acceptance testing according to manufacturer specifications.
Intel Corporation
May 1986 – July 1996
Metrologist / Manufacturing Engineer for microprocessor fabrication.
Test equipment calibration and repair. Schedule and perform repairs of thin films IC manufacturing and process equipment. PLC robotic tool point adjustments. Performed service and repairs on metal sputter, ion implant, D&W metal etch and gold deposition equipment. Repair cryogenic, mechanical and turbo-mechanical pumps for High VAC integrated circuit fabrication equipment. Respond to emergencies as a member of the HAZMAT and Emergency Response Teams. Repair and calibrated manufacturing test equipment to Mil STD 45562. Digitizing and analog oscilloscopes-500Mhz to 1Ghz, time mark generators, amplifiers, frequency counters, parametric analyzers, waveform monitors, data loggers, spectrum analyzers, thermo sensors, thermal couples, precision DC power supplies, torque meters, Hart scientific thermometers, Fluke dual and single DVMs, reflectometers , laser particle monitors, surf-scan wafer thickness meter, frequency generators, curve tracers, frequency transducers, de-ionized water flow meters, dual and triple dc power supplies, OTDR, candle power meter, variable and primary oscillators , lasers sources, thermo probe, high voltage and current probes, amplifiers, timing generators, bake ovens, ultra sonic, depth gauge, calipers, vibration sensors, accelerometers, Sartorius and Ohaus scales used on a regular basis. Schedule equipment for calibrations and for NIST vendor certifications. Develop the construction procedure of the triple point of water cell for use by technical peers. Used helium leak detection systems for high vacuum process chamber repair and vacuum pump operating characterizations. Use process gases and chemicals. Repaired and replaced Surface Mount Technology components in many brands of manufacturing test instruments. Trained on and built the new FAB wafer planarization prototype at the Gaard Automation factory while also receiving factory specific certifications. Troubleshoot pneumatics and hydraulics, valves and transducers. Created test analysis data for Pentium processors. Performed in FAB testing for particulate reduction and control. Identified laminar flow issues. Instituted and trained personnel on Statistical Process Control inside manufacturing.
US Army
December 1979 – January 1985
RF radar specialist / US Army Europe/MOS 24C
High power RF illuminator radar AN-MPQ-52 specialist. Perform maintenance at field level on radar and firing section control boxes and launchers. Identify malfunctions, make repairs to RF assemblies to component level, performed alignment and synchronization of electro mechanical assemblies. Initiate requests for PLL spare parts, perform prescribed system tests according to Technical Manuals to determine operational and maintenance status of site equipment, install equipment modifications, supervise launcher and missile crew activities, provide technical training to missile crewmembers. Maintain Technical Orders and manuals. Directed daily operations in the firing control section related to mobilization or PMCS tasks. Tag and inventory classified system level radar spare parts. Perform live fire field exercises on Crete. Provide maintenance during battery Organizational Readiness Exercises and for Re FORGE
|
Skills: |
Possess twenty plus years experience in Electronics/Semiconductor/Communications engineering fields with regard to both the military and civilian sectors. Provided supervisory and technical expertise to the military radar fire control section operators for timely mission completion. Repaired and serviced complex surface-to-air missile defense system radars supporting EUAEUR and NATO. In the semiconductor sector, I delivered technical expertise for the fabrication of micro-electronics as a Process Engineer. Trained FAB operators on statistical process control and safety policies, while minimizing affect on quality and factory thru put time.
Worked with vendors on wafer processing and new equipment characterizations. Repaired complex manufacturing analytical equipment. As a Metrologist, I was responsible for the tracking, calibration and repair of sophisticated manufacturing test and measurement equipment traceable to NIST. Earned numerous industry specific certifications. Conceived new test methodologies and processes to be used in the Metrology lab. Lately I have provided my engineering expertise to the telecommunications / IT profession on many large scale projects throughout the world. Supervised and mentored subcontract employees. Fielded new SONET optical transport equipment using topologies such as the ring, hub, point to point and back to back configurations. Supported electronic warfare operations for CENTCOM and NATO. Monitored and tested T3 level communications for OIF. Performed my tasks in isolated environments and combat zones worldwide. Have regularly multi-tasked my leadership and technical duties to find solutions to issues at hand, interfacing with company superiors and customers.
|
Education: |
Electronics Engineering, Bryman College
Flagstaff High School
Circuit Design, Mesa Community College
Technical Writing, Gateway Community College
Technical Certifications:
Promina IDNX, Iraq
Pelco video surveillance, Netherlands
AN/PSN-11 GPS, Bosnia
GEODSS sensor operator, Diego Garcia
Emergency power generation, Diego Garcia
Telecom installation practices, Texas
1680 OGX, Texas
1640 DWDM SONET, Texas
1690 Enterprise, Texas
BNC / wire wrap, Texas
Fiber optic splice and theory, S. Carolina
Fiber optic splice and theory, Alaska
Outside Plant / ROW inspection, Alaska
Ethernet Analysis, T1, Alaska
Micro planar, Oregon
Hazardous Materials Response Team, Arizona
Statistical Process Control, Arizona
Precision Thermometry, Maryland
Principles of Metrology, Phoenix
Digital oscilloscopes, Maryland
Analog oscilloscopes, Maryland
Semiconductor high vacuum processes, Phoenix
Army AN / MPQ-52 RF / high power radar, Texas
Army Tracking Adjunct System, Texas
Army radar cooling systems, Germany
Army 16D firing section operations, Texas
ComTrain tower climb and recue, Georgia
|
Endorsements
|
 |
kevin has received 0 endorsements.
|
kevin has endorsed 0 Members.
|
| |
Rank |
Title |
Location |
Status |
Actions |
|
Public Messages
|
|
| From |
Date |
Message |
No public messages. |
|
|
